Best Miter Saw Blades



Miter saw blade is one of the most important parts of a miter saw. For you to be able to come up with a top notch miter saw blade, you need to be able to distinguish the difference in quality of different miter saw blades in the market. Once you are able to pick the best miter saw blades, you can then pick a blade with respect to your cutting requirements and durability. Your choice of a miter saw blade; therefore, should mainly be guided by the nature of use and not just the pricing.

Best Miter Saw Blades Comparison Table 2017

NameRatingPriceProduct WeightTooth CountBlade Diameter (inches)
DEWALT DW7296PT4.6$$1 pound9612
Makita A-944874.7$12 ounces72
Freud LU94M0104.7$$2 pounds8010
Hitachi 7252064.6$1 pound7210
Makita A-937345$$1 pound10012

How to Choose the Best Miter Saw Blades

Miter saws, whether compound, sliding or standard are sized by the blade diameter. The popular blade diameters are 8¼ inches, 10 inches, and 12 inches. Therefore, your miter saw purchasing decision needs to factor in the blade diameter. With that said, you need to select a miter saw blade that will allow you to cut through the widest cutting width possible.

Professionally, the most convenient all-round miter saw blade for general woodworking and other cutting jobs is a 12-inch blade. A 10-inch blade will crosscuts a work piece up to 10 inches wide of a standard 2 x 6 or 4 x 4 in a single cut. A 12-inch blade on the other hand will crosscut wider work piece of up to 12 inches.

  • The Material of the Saw Blade

    The type of material of a particular miter saw blade matters a lot. The durability, performance, and speed of a blade depend mostly on the material. Among the commonly used materials, include carbide blades, steel blades and high-speed steel blades. Steel blades are normally inexpensive, and they are convenient for cutting softwood and not hardwood.

    High-speed steel blades; on the other hand, are harder and sharper. Carbide blades are defined by teeth that are attached with carbide tips. Of all the blade materials, carbide blades are exceptionally long-lasting, and they maintain sharpness for a considerably longer duration. Carbide miter saw blades can handle the toughest work piece, and they will keep working for longer durations between cuttings.

  • Types of Miter Saw Blades

    To be able to effectively make a good choice of a miter saw blade, you need to have basic knowledge of the various types of miter saw blades. Blade types are based on the shape and configuration of the teeth. The first type is the flat top blade, which is ideal for ripping. This blade will produce the best grooves along the grain, and it will make the best joints.

    The second type is the alternative top bevel blade, which is the first choice for crosscutting as well as working plywood. Its teeth sheer the work piece, providing you with smooth cuts and also reduces surface rupture. The third type is the alternative top bevel and raker, which is considered all-purpose blade. This blade will do crosscuts and rips well, but not as efficient as the first two types. The fourth type is the triple chip blade, which is effective for cutting manmade materials, including plastic and particleboard.

  • Arbor Size/ Hole

    The arbor size or hole of a blade is an equally important feature to consider when choosing the best miter saw blades. The best arbor hole is one that is flawlessly sized. The best miter saw blades are incorporated with precise arbor size, and it is usually easy to note the precision; all you have to do is feel the hole.

    A preferred hole should provide you with a feel of smooth sides and sharp edges. Therefore, you should not engage any blade with a rough hole. Rough holes and bent edges indicate that the arbor size may be oversized or may be of imprecise measurements.

  • Important Features to Consider

    The best miter saw blades you choose should have accurate sharpened teeth. This will provide you with quick, smooth cuts, and an extended life for the blade. Choose a blade that is coated; this way, you will be able to prevent it from rusting and reduce friction significantly. Go for blades with thicker bodies, if you are dealing with tough applications.

    Make sure to choose a blade that is protected against blade warping as well as binding. When dealing with miter saws with laser, choose a blade that is made of laser-cut body; this will provide exceptional accurate cuts. You can also promote blade life by choosing a blade with tough coat finish.


Choosing the best miter saw blade is not that hard as you might have thought. Well, as discussed in the guide, you need to adhere with each and every guideline to be successful. In general, you need to always consider the type of miter saw you are operating, the type of work piece you will be cutting, and the type of cutting (whether rip cut or crosscut) you will engage.

Always know that the greater the number of teeth, the smoother and slower the miter saw blade will cut. The lower the hook angle of the teeth, the slower and smoother the miter saw blade will cut and the greater the feed pressure.