What are the Safety Concerns of a Miter Saw

1832

There are many safety concerns of a miter saw. Just like any other machine, operating a miter saw requires you to be cautious in order to avoid unnecessary incidents. A miter saw is a power cutting tool that uses a sharp blade; therefore, if there is no safety precaution observed, the user is more likely to get injured. Different miter saw manufacturers attach manuals to their products with the appropriate safety concerns of that particular miter saw.

Miter Saw Safety Concerns

There are many specific safety concerns that are of great importance to the miter saw operator. The following are the key safety concerns that you need to be aware of.

  • Failure to read the user manual thoroughly before operating a miter saw.
  • Failure to closely follow instructions and warnings stipulated in the user manual.
  • Operation of a miter saw in explosive environments, including the presence of inflammable gases and liquids.
  • Lack of keeping children away from the work area when operating a miter saw.
  • The use of modified plugs, which do not match the outlets, increasing electric shocks.
  • The use of damaged extension cords, such as bent prongs, exposed wires, and cuts.
  • Exposing the miter saw to wet conditions, including rain, and increased risk of electric shock.
  • The use of small extension cords in terms of amperage, causing the extension cord to overheat.
  • Poor positioning of the hands when handling a miter saw on a miter saw stand.
  • Wearing loose clothes and dangling jewellery while operating a miter saw.
  • Lack of wearing protective gadgets when operating a miters; hence exposing the eyes to spinning particles and the ears to excessive noise.
  • The use of a blunt miter saw blade.
  • Making adjustments to the miter saw while it is still connected to power.

A miter saw is perilous if it is not used correctly. The following guidelines are of great importance when operating a miter saw.

  • You need to protect your eyes and ears. The operation of a miter saw is loud; therefore, you need to wear ear protection. On the other hand, you need to wear eye protection, in order to protect your eyes from small pieces of moulding that may shoot out, due to high speed.
  • You need to be extremely cautious not to place your hands in the wrong position when operating a miter saw. Normally, you are not supposed to place your hands closer to the ends of your miter saw’s fence. Professionally, you are advised to hold your fingers against the fence of your miter saw; in such a way that your hand stays put, and then gently wrap your thumb over your workpiece.
  • Never be in a hurry as far as switching off the miter saw is concerned. If you have the tendency of lifting your miter saw before the blade stops; then you should stop this habit. The right way to do it is to wait for the blade to stop before lifting it.
  • Poor positioning is extremely dangerous. You are supposed to position your hands in such a way that your arms are out of the miter saw’s way. It is vitally important to always confirm your position before initiating a cut.
  • Loose clothing and dangling jewellery are a safety threat when operating a miter saw. You need to avoid wearing dangling jewellery and loose clothing that can potentially get trapped in moving parts of your miter saw.
  • The tendency of using damaged tool is a potential threat when operating a miter saw. Therefore, you are supposed to examine each tool for damages before using it, and you should not under any circumstances use damaged tools.

Miter Saw Safety Rules

  • Always use a miter saw stand to secure your miter saw.
  • Only make use of crosscut miter saw blades that have negative hook angle.
  • Use miter saw blades of the correct size as well as type.
  • Ensure that the blade spins correctly, and the teeth point toward the rear of the miter saw.
  • Make sure to use a blade guard.
  • Never switch ON the miter saw while the blade is in contact with the work piece.
  • Keep fingers, hands, and arms away from a rotating blade in order to prevent injury.
  • Don’t reach the underneath of your miter saw while it is ON.
  • Always allow the motor to reach its full speed before initiating a cut.
  • Do not carry out freehand cuts, you are always advised to hold the workpiece firmly against a fence as well as the table.

Conclusion

The use of a miter saw, as you have read through the guide, does entirely depend on your ability to follow warnings and instructions correctly. You can achieve this by taking serious consideration of all the miter saw safety concerns. Electric safety, tool safety, personal safety, and operation safety are the safety measures that you must always adhere to when operating a miter saw.

SHARE