How to Sew a Ripped Seam

507

If you’re distressed about your ripped seam and worried about spending money for repair, this guide will show you how to sew a ripped seam on your own. You don’t need to bring your clothes to the repair center. Mending a seam is actually simple and easy. Don’t toss your clothes just yet because you can sew a ripped seam with a few simple steps. You just need to replace the thread.

Assess the Damage

First, you need to check how big the damage is. This will guide you on what you need to sew. To properly see the damage, turn your garment inside out and look for the area on the seam that has turned into a hole.

If you have a surged garment, you will see that a lot of threads are overlapping the edges of the seams. It will be in a zigzag or looping pattern. If this is the case and they are damaged, you will have to remove them. If not, you can simply leave them alone because you only need to replace the seam threads.

Prevent Further Damage

Before you proceed to sew a ripped seam, you need to make sure that you prevent further damage to the garment. Once you’ve assessed the damage, you need to tie the threads on the seam to stop it from unraveling any further. You will see two threads at each end of the opening so you will have 4 in total.

Tie the two threads at the end of the ripped seam together. Make sure that it’s snug at the edge of the seam. Do a double knot. Do the same for the threads at the other end of the torn seam. Now, you will only have one hole in the middle. You are now ready to sew a ripped seam.

Basic Hand Stitches

To sew a ripped seam, you would need to use at least a basic hand stitch. You can choose a stitch depending on your comfort, skills, and preferences. Here are the basic hand stitches that you can use to sew a ripped seam.

  • Running Stitch

    The most basic of hand stitches is the running stitch. All other forms of stitches are based on the running stitch. It’s a very simple hand stitch but it’s very effective in repairing clothing. You can use the running stitch to sew patches into clothing, repair hems, and reattach a strap or other pieces of fabric back to its main piece. This is also the easiest option for beginners. It only involves going in a single straight line.

  • Back Stitch

    This is an advanced variation of the running stitch. To do this, you have to constantly step back and go 2 steps forward along the stitch line. This hand stitch is a very strong and flexible stitch for repairing areas that have been worn out and to sew a ripped seam. It’s ideal for reattaching zippers and repairing tears. You can use a back stitch where a running stitch is applicable. It would be stronger and would last longer.

  • Whip Stitch

    You can also use the whip stitch to sew a ripped seam. It’s a bit more complicated but it’s a lot more useful than the basic running stitch. You can use this technique to fix bigger damages like a busted seam on pants, pockets that have split open, and hems that have split at the bottom.

Of course, there are other hand stitches that you can use but those are the basic ones that you can choose from to sew a ripped seam.

Steps to Sew a Ripped Seam

Now that you have chosen the kind of stitch that you want to use, you can proceed to sew a ripped seam with that hand stitch.

  • What You’ll Need

    Here are the tools that you will need to sew a ripped seam.

    Scissors

    A sewing kit

    Thread

    Fusion tape – optional

    Liquid seam sealer – optional

    Seam ripper – optional

  • Sew a Straight Stitch

    Prepare your thread and needle. Start by inserting the needle at the end of the hole of the seam where it’s closed. Insert it about half an inch from where the seam started to open. Sew a straight stitch above the seam that’s still in place. Then sew toward the open seam.

  • Sew Diagonally

    After sewing a straight stitch, sew a few stitches diagonally and bring it down. You will work your way just beneath the original stitch of the seam. Once you are in the open part of the seam, lay both sides of the seam together then sew straight below the old seam’s holes.

  • Use Straight Pins

    To help you hold the open seam together, you can use straight pins while you sew a ripped seam. If you are not comfortable using straight pins, you can use a masking tape instead. Fold the tape over the top of the seam to help you have a better view of the seam you are sewing.

  • Sew Below the Holes

    Finally, sew below the holes from the old seam thread. This will help you ensure that the holes do not appear when you’re wearing the garment. The holes will be a part of the seam but it should not be visible in your garment. Continue to sew in small stitches all the way to the other side of the seam that is open. Use the old holes as a guide to do a straight line.

  • Finishing

    To finish sewing the ripped seam, tie off the thread at the other side. Cut the thread about 1/8in away from the knot. Go to the other side of the seam and sew a few stitches diagonally upward. From here, you should work your way back to above the original stitching of the seam.

    When you’re done, it will look just like the side that you started on. By using the diagonal lines, your new seam will look more natural.

    Tie off the thread and cut it about 1/8 inch from the knot. Check if you’ve properly repaired the seam, turn the garment inside out.

Alternatively, you can use a sewing machine to sew a ripped seam. You can choose from Singer Sewing Machine, Brother Sewing Machine, or Michley Mini Sewing Machine.