There are many ways to clean the floor, but steam mops suddenly caught your attention. That’s not surprising at all, considering the growing demand for these cleaning tools. You’ve come to the right place since we’re going to teach you how to use a steam mop.
In order for you to effectively clean your floor with a steam mop, we’ll carefully discuss the steps by dividing them into two sets.
Here, we’re going to focus on preparing the water tank, electrical cord, and heat.
- Open your steam mop’s water tank. It is typically placed at the top of the structure.
- Measure the water through your steam mop’s own measuring cup. Pour it using the funnel included in the package.
- Pour water until you reach the “max” indicator inside the tank. Make sure you won’t overfill your steam mop.
- Close the tank once again with its cap. Double check if the cap is secure.
- Remove the electrical cord from its own compartment somewhere on the steam mop. Read your user’s manual regarding voltage to avoid accidents.
- Plug the cord into an electric outlet.
- Wait for 15 to 30 seconds until your mop is finally ready to produce steam using its water tank and heating system.
- Activate your steam mop’s trigger to release water in the cleaning pad.
The Cleaning Process
Is a steam mop really that different compared to an ordinary one? Find out by going through the cleaning procedure below:
- Push and pull the steam mop’s handle so you can move it back and forth. You got that right; it works just like a regular mop.
- Focus on smaller sections so you can overlap your strokes to ensure cleanliness.
- Use the trigger from time to time to release more steam and water, enough to dampen the cleaning pad.
- Mop until you empty the water tank. Never forget to unplug your steam mop after the process. Finally, return the cord in its compartment.
Allow us to remind you about the most important points from our tips on how to use a steam mop. To ensure safety, don’t overfill the water tank and leave its cap loose. Additionally, read the user’s manual to take note of crucial factors such as voltage.